Main Menu
New Products Available
Paypal Accepted
Customer Loyalty Points
Worldwide Shipping

Range Rover Classic Herringbone Rear Retrim Kit 2 Door

Product ID: EXT700-018

Exmoor Trim have developed the classic Chevron Bronze Cloth as it was referred to in production commonly known as “Herringbone”

This cloth was widely used on all early Range Rover Classic seats from 1972 onwards for many years.

In the 1970’s Lew Gostling (the father of Exmoor Trims Chairman, Julian Gostling) was the Head of Experimental Trim at Land Rover. He was responsible for all the trim and seat development for the Range Rover as well as production planning. Exmoor Trim still retain all the original patterns and the knowledge that comes with them. As a result, we have been able to produce these detail correct replacement heritage trim covers for the Range Rover Classic. 

Full product description
£522.00 £435.00
Pay Pal Payments


The Rear Bench 2 Door RRC Heritage Re-trim Cover Kit, Herringbone 

Consists of the following:

·       sewn cushion cover for the two door rear seat option 

·       cushion frame edge finisher palomino

·       sewn squab cover for the rear seat 

·       squab frame edge finisher palomino


The replacement covers are designed to fit very good/new foams if your seat foams are worn out and lifeless we cannot guarantee these covers will fit.

This is due to the trim covers being bonded to the face of the seat foams in production. When fitting the new covers, you will need to make sure they are bonded to the foams to achieve the best result.

There are two types of rear seat for the early classic

·       2 door bench version

·       4 door bench version

Please ensure you order the correct type they look very similar however the seat was moved further back for the 4 door and a larger area was removed from the cushion outer panels to allow for the wheel arch it is important that you order the correct type, if you are not sure please do ask.

The sewn covers are simply glued to the underside of the foams over the wire frame and these are a fairly straightforward seat to recover compared to the complicated front seats.


If you are not confident re-trimming your seats, we recommend that you take them to a professional fitter or you can have your seats restored by Exmoor Trim guaranteeing you get the best result. 

Exmoor Trim offer a "Full Seat Restoration” service. We will take your seats and fully strip every component back to bare metal and repair any damage.  The frames are then beautifully finished with Heritage paint and assembled with new trim covers

We also offer an exchange service. We have available a stock fully restored seats that have been through our "Full Seat Restoration” process.  If this is of interest then please contact our sales team and we can advise if your seats are suitable for exchange.

We understand that you may wish to have your original seats returned once restored and not use our stock seats this is no problem at all and we are more than happy to ensure this is done.

If over time your seats have been removed, replaced or damaged we do have replacement sets available to purchase outright please ask.