These front seats are sold in pairs only and are delivered ready to simply bolt in and use straight away, the seats arrive complete with runners as an entire new seat.
The seats are fitted as standard with Exmoor Trim seat heaters for both seat backs and bases including a full wiring loom and dash board switches with a high & low heat setting that switch on and off as they reach required temperature automatically. These switches can be installed either onto the dash or a centre console with the loom being plenty long enough for either. The loom has detachable plugs close to the base so you can remove the bases and unplug when required for service or under seat storage / battery access.
PLEASE NOTE: The Exmoor Heater Kit will NOT connect to the existing "winter pack" if you have seat heaters in your seats now, that are factory fitted.
However they can be modified by an auto-electrician but we do offer the OEM heater pads that we can install into the new Elite Mk2 seats at point of manufacture on request. This will enable you to get a direct fit/plug into for your seat heaters under the seat base.
Pneumatic lumbars are also fitted to the seat backs on both the driver and passenger side which offer extra lumbar adjustment for the individual
The seat offers higher backrest with adjustable height headrest and side impact pads with superb style and comfort levels. The backrest is designed to hold you in around the hip and lower waist and then opening out leaving the shoulders free whilst supporting the frame. The seats will recline as normal and as with all Exmoor seats, they have removable seat bases for easy access to the under seat and battery storage unlike many other seats on the market .
The Extended Seat Base from Exmoor is much longer than the original seat bases fitted to all Defender Land Rovers. These new longer seat bases give superb support under the legs with standard raised sides for easy access. To install you simply clip out and clip in the new extended seat base it could not be easier. This is just what every Land Rover owner needs a bit better support on and off-road which you get with this high grade moulded internal foam for long life. These do give very good support for your legs, more so for the taller driver.
The Elite Mk2 is available in our full range of trim options from the drop down menu below the main image or you can choose options from our "Signature " range which offer the individual a fully tailored personal service. Contact our sales team who can guide you through the full range of Leather options and colours that we have available.
This seat is very very comfortable and we are delighted with the end result not just with comfort levels but in car styling is just as important.
These seats are proudly made in house by our own craftsmen and women giving you the best in British Made 100%
This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages. After the test the seat remained full intact and operational. Full copies of the test report are available upon request.
While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available.