Main Menu

Search Model

Search Model



Reset all

Standard Front Seats- Elephant Hide Grey

Product ID: Choose Option
Standard Front Seats- Elephant Hide Grey Full product description
£81.78 £68.15
Pay Pal Payments

DESCRIPTION

Standard Front Seats- Elephant Hide Grey

Standard Front Seating.

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Elephant Hide Grey Vinyl.... Elephant Hide grey seating was introduced into mainstream Land Rover production in 1954, and used to great effect in the Series II and IIA interiors.

At the time there were on average 1700 Land Rovers rolling off the production line a week. Taking in to account model variations and seating types, the result was over 1000 seats a day going through the exceptionally busy trim shop. We now have a material that’s a superb reproduction and gives all of the features that are so important if restoring these historic vehicles. We don’t, however, need the cotton backing used on the original materials – quality modern vinyls can give the same effect and long life as this classic material has done for over 40 years.

Exmoor Trim now produce a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame – an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts, if you require leather retaining straps then these are available separately

RESTORATION SERVICE

You can also use Exmoor's in house restoration service and send in your original seats to have the complete treatment from our experts. many of you decide to use this service to keep as much original as possible, something we understand only too well. If this service is of interest to you then you can click on the RESTORATION title at the top of the home page or simply call to discuss 01984 635060

When using the restoration service we follow the original methods to the last detail to produce a truly great finish even down to the old style rubberised horse for the internal padding and down to old fashion trim nails, so if this is what your after please do call.

All our Standard or Deluxe style series II, IIA & III seat bases use a medium density fibre board.

Standard Front Seats- Elephant Hide Grey

Standard Front Seating.

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Elephant Hide Grey Vinyl.... Elephant Hide grey seating was introduced into mainstream Land Rover production in 1954, and used to great effect in the Series II and IIA interiors.

At the time there were on average 1700 Land Rovers rolling off the production line a week. Taking in to account model variations and seating types, the result was over 1000 seats a day going through the exceptionally busy trim shop. We now have a material that’s a superb reproduction and gives all of the features that are so important if restoring these historic vehicles. We don’t, however, need the cotton backing used on the original materials – quality modern vinyls can give the same effect and long life as this classic material has done for over 40 years.

Exmoor Trim now produce a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame – an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts, if you require leather retaining straps then these are available separately

RESTORATION SERVICE

You can also use Exmoor's in house restoration service and send in your original seats to have the complete treatment from our experts. many of you decide to use this service to keep as much original as possible, something we understand only too well. If this service is of interest to you then you can click on the RESTORATION title at the top of the home page or simply call to discuss 01984 635060

When using the restoration service we follow the original methods to the last detail to produce a truly great finish even down to the old style rubberised horse for the internal padding and down to old fashion trim nails, so if this is what your after please do call.

All our Standard or Deluxe style series II, IIA & III seat bases use a medium density fibre board.

Standard Front Seats- Elephant Hide Grey

Standard Front Seating.

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Elephant Hide Grey Vinyl.... Elephant Hide grey seating was introduced into mainstream Land Rover production in 1954, and used to great effect in the Series II and IIA interiors.

At the time there were on average 1700 Land Rovers rolling off the production line a week. Taking in to account model variations and seating types, the result was over 1000 seats a day going through the exceptionally busy trim shop. We now have a material that’s a superb reproduction and gives all of the features that are so important if restoring these historic vehicles. We don’t, however, need the cotton backing used on the original materials – quality modern vinyls can give the same effect and long life as this classic material has done for over 40 years.

Exmoor Trim now produce a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame – an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts, if you require leather retaining straps then these are available separately

RESTORATION SERVICE

You can also use Exmoor's in house restoration service and send in your original seats to have the complete treatment from our experts. many of you decide to use this service to keep as much original as possible, something we understand only too well. If this service is of interest to you then you can click on the RESTORATION title at the top of the home page or simply call to discuss 01984 635060

When using the restoration service we follow the original methods to the last detail to produce a truly great finish even down to the old style rubberised horse for the internal padding and down to old fashion trim nails, so if this is what your after please do call.

All our Standard or Deluxe style series II, IIA & III seat bases use a medium density fibre board.

Standard Front Seats- Elephant Hide Grey

Standard Front Seating.

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Elephant Hide Grey Vinyl.... Elephant Hide grey seating was introduced into mainstream Land Rover production in 1954, and used to great effect in the Series II and IIA interiors.

At the time there were on average 1700 Land Rovers rolling off the production line a week. Taking in to account model variations and seating types, the result was over 1000 seats a day going through the exceptionally busy trim shop. We now have a material that’s a superb reproduction and gives all of the features that are so important if restoring these historic vehicles. We don’t, however, need the cotton backing used on the original materials – quality modern vinyls can give the same effect and long life as this classic material has done for over 40 years.

Exmoor Trim now produce a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame – an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts, if you require leather retaining straps then these are available separately

RESTORATION SERVICE

You can also use Exmoor's in house restoration service and send in your original seats to have the complete treatment from our experts. many of you decide to use this service to keep as much original as possible, something we understand only too well. If this service is of interest to you then you can click on the RESTORATION title at the top of the home page or simply call to discuss 01984 635060

When using the restoration service we follow the original methods to the last detail to produce a truly great finish even down to the old style rubberised horse for the internal padding and down to old fashion trim nails, so if this is what your after please do call.

All our Standard or Deluxe style series II, IIA & III seat bases use a medium density fibre board.

Standard Front Seats- Elephant Hide Grey

Standard Front Seating.

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Elephant Hide Grey Vinyl.... Elephant Hide grey seating was introduced into mainstream Land Rover production in 1954, and used to great effect in the Series II and IIA interiors.

At the time there were on average 1700 Land Rovers rolling off the production line a week. Taking in to account model variations and seating types, the result was over 1000 seats a day going through the exceptionally busy trim shop. We now have a material that’s a superb reproduction and gives all of the features that are so important if restoring these historic vehicles. We don’t, however, need the cotton backing used on the original materials – quality modern vinyls can give the same effect and long life as this classic material has done for over 40 years.

Exmoor Trim now produce a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame – an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts, if you require leather retaining straps then these are available separately

RESTORATION SERVICE

You can also use Exmoor's in house restoration service and send in your original seats to have the complete treatment from our experts. many of you decide to use this service to keep as much original as possible, something we understand only too well. If this service is of interest to you then you can click on the RESTORATION title at the top of the home page or simply call to discuss 01984 635060

When using the restoration service we follow the original methods to the last detail to produce a truly great finish even down to the old style rubberised horse for the internal padding and down to old fashion trim nails, so if this is what your after please do call.

All our Standard or Deluxe style series II, IIA & III seat bases use a medium density fibre board.

Standard Front Seats- Elephant Hide Grey

Standard Front Seating.

This style of traditional Standard Series II IIA, seating is only available in Black Vinyl, Grey Vinyl & Elephant Hide Grey.

please note that these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Elephant Hide Grey Vinyl.... Elephant Hide grey seating was introduced into mainstream Land Rover production in 1954, and used to great effect in the Series II and IIA interiors.

At the time there were on average 1700 Land Rovers rolling off the production line a week. Taking in to account model variations and seating types, the result was over 1000 seats a day going through the exceptionally busy trim shop. We now have a material that’s a superb reproduction and gives all of the features that are so important if restoring these historic vehicles. We don’t, however, need the cotton backing used on the original materials – quality modern vinyls can give the same effect and long life as this classic material has done for over 40 years.

Exmoor Trim now produce a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame – an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts, if you require leather retaining straps then these are available separately

RESTORATION SERVICE

You can also use Exmoor's in house restoration service and send in your original seats to have the complete treatment from our experts. many of you decide to use this service to keep as much original as possible, something we understand only too well. If this service is of interest to you then you can click on the RESTORATION title at the top of the home page or simply call to discuss 01984 635060

When using the restoration service we follow the original methods to the last detail to produce a truly great finish even down to the old style rubberised horse for the internal padding and down to old fashion trim nails, so if this is what your after please do call.

All our Standard or Deluxe style series II, IIA & III seat bases use a medium density fibre board.

Please Note: these seats are also available as backs or bases on their own. Driver and passenger backs are available with either bolt fitting or pin type fitting on the pivot point.

Elephant Hide Grey Vinyl.... Elephant Hide grey seating was introduced into mainstream Land Rover production in 1954, and used to great effect in the Series II and IIA interiors.

At the time there were on average 1700 Land Rovers rolling off the production line a week. Taking in to account model variations and seating types, the result was over 1000 seats a day going through the exceptionally busy trim shop. We now have a material that’s a superb reproduction and gives all of the features that are so important if restoring these historic vehicles. We don’t, however, need the cotton backing used on the original materials – quality modern vinyls can give the same effect and long life as this classic material has done for over 40 years.

Exmoor Trim now produce a range of Series II and IIA seating that is simply as good as it gets. The front seat cushions and squabs, although now using modern high quality foam, have superb feel and ride, with the metal back plates beautifully reproduced as original and not with a substandard wooden frame – an important safety factor.

Metal-backed squabs were only ever used and were available with two types of fixing with either bolt or pin type available.

The seat backs are supplied with new pivot bolts, nylon washers and locking bolts, if you require leather retaining straps then these are available separately

All our Standard or Deluxe style series II, IIA & III seat bases use a medium density fibre board.