Main Menu
New Products Available
Paypal Accepted
Customer Loyalty Points
Worldwide Shipping

Modular Seat - Pairs

Product ID: Choose Option

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

Full product description
£1,034.24 £861.87
Pay Pal Payments

DESCRIPTION

Described by many as a true armchair ride, it’s a great seat for many functions, comfort being the main.

The Modular front seats offer the driver and passengers a great step forward in terms of comfort level and styling with the seat cushion remaining the same dimensionally but with the extra added height on the side bolsters for great hold and comfort with nice trim detail. 

The seat squab is slightly raised with a modular design and improved upper body support. The headrest has changed shape to an integral Modular shape offering a sportier over all look and flowing shape.

The seat squab can be adjusted to any angle, with the ability to tailor the rake of the seat back to the individual with additional rear pockets for storage as standard.

These seats have high quality fully tested seat sliders and runners they can easily be moved forward and backwards with a simple lift arm under the front of the seat cushion as you expect to find in most vehicles of this era. 

To compliment this, the seat bases are also removable and simply located into the rear of the seat frame and then snap locked into the front of the seat runners making it easy to access the under-seat storage compartment and battery location.

The Modular upgrade seats by Exmoor are offered in pairs only, complete with sliders/runners and all fixings as a bolt straight in pair of seats which utilise the original four mounting points in the seat box.

These Modular seats will fit all Defenders right through until 2016 when the production of the Defender came to an end.

Many factories fitted seats were offered with internal seat heaters, so at Exmoor we have decided to heat all our Modular Defender front seats as standard fitment.

Both seat cushions and squabs are heated internally and the heater wiring all clips together so you can still remove the seat bases when required.  Many of the earlier vehicles never had seat heaters fitted so we also include with all our Modular Defender seats as standard a full wiring loom for the seat heaters.  These include illuminating heater switches so you can control both seats individually with a hi & low heat option and the wiring loom includes the inline fuses along with a wiring instruction which you can also download.

We include a pair of adaption leads which means if your vehicle already has factory fitted heaters for the seats (known as winterisation pack) then the seats loom will plug directly into your vehicle without additional wiring required. 

We use a higher-grade foam than originally used to increase the life span of these seats and much improved levels of comfort.

All coming together to give a great stylish pair of Modular Style seats by Exmoor.

As with all Exmoor Trim front seats these use our new Modular seat frame and are issued with full testing certificate to keep with your logbook. Don’t settle for less, safety matters. 

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available. 

The Modular seat from Exmoor Trim provides superior comfort and support. Offering raised sides to the seat base and back rest with high density foam to give a snug fitting seat with improved lumbar and rear pocket as standard. The seat base can still be removed allowing easy access to your battery. These seats are fitted with heaters as standard. A good all round seat ideal for on or off-road use.

APPROVED by the Vehicle Certification Agency (VCA). Impact tested (Millbrook Testing Ground). Approved worldwide and certification supplied with every seat. 

Sold in pairs.

DISCLAIMER

This seat is designed as a more practical and comfortable alternative to the standard load area occasional seating options. It has been tested at Millbrook Proving Ground in accordance with ECE Regulation 17.08, Annex 7. This is a 20g sled test that simulates a forward and rearward impact at 30MPH It is designed to test the integrity of the seat frame assembly and anchor points. Note, it does not take into account the structural integrity of the vehicle or seat belt anchorages.  After the test the seat remained full intact and operational.  Full copies of the test report are available upon request.

While every effort has been made to ensure that this seat is robust, it must be noted that this is an aftermarket, retro fit item andyou must follow our fitting guide and instructions. If you are unsure or do not wish to install yourself then it’s worthwhile considering our in-house fitting centre where professional fitting service is available.